• O-Ring and steel locknut assembled for conveniencce and faster assembly.
• One-piece solution with smooth internal surfaces provides for easier wire routing, protection, and installation.
• Easy, permanent assembly: the installer twists the tubing over the connector ferrule.
• Fittings are for use with Heyco-Flex I Conduit.
• All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
• Suitable for a wide array of electrical applications:
• Commercial and Industrial HVAC Systems
• Motorized Equipment
• Enclosed Power Sources
• Garage Door Openers
• Major Appliances
• If using a tapped hole, Teflon® tape is needed on the threads of the connector.
• Finishing collars neaten rough cut tubing ends.
• New! Assembly Tool available for assembling Quick Twist Fittings into HF1 and HF2 Conduit and Tubing.

QuickSpecs

Material		Nylon 6/6
Certifications		Recognized under the Component Program of Underwriters' Laboratories File E121095
		Listed under Underwriters' Laboratories File E28430
Flammability Rating		94V-2
Material Temperature Index		Maximum temperature on part not to exceed 221°F (105°C)

FITS HF1 CONDUIT TRADE SIZE			PART NO.	PART DIMENSIONS
	A Mounting Hole Diameter		Gray	B Max O.A. Length		C Body or Thread Length		D Wrenching Nut Thickness		E Wrenching Flats/Flange Dia.
	in.	mm.		in.	mm.	in.	mm.	in.	mm.	in.	mm.
Straight-Thru Style
3/8	.875	22,2	8488RL	Straight-Thru, NPT Hub Part Dimensions
1/2	.875	22,2	8494RL
3/4	1.093	27,8	8498RL
90° Sweep Style
3/8	.875	22,2	8503RL	90° Sweep, NPT Hub Part Dimensions
1/2	.875	22,2	8508RL
3/4	1.093	27,8	8513RL

Standard Color: Gray Fitting with Assembled Black O-Ring and Steel Locknut.