*Collar not assembled

• Finishing collars neaten rough cut tubing edges.
• One-piece solution with smooth internal surfaces provides for easier wire routing, protection, and installation.
• Easy, permanent assembly: the installer twists the tubing over the connector ferrule.
• Fittings are for use with Heyco-Flex II Tubing.
• Unique locking fingers on Snap-In Hubs accommodate various panel thicknesses.
• All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
• If using a tapped hole, Teflon® tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain liquid tight.
• Suitable for a wide array of electrical applications:
• Commercial and Industrial HVAC Systems
• Motorized Equipment
• Enclosed Power Sources
• Garage Door Openers
• Major Appliances
• New! Assembly Tool available for assembling Quick Twist Fittings into HF1 and HF2 Conduit and Tubing.

QuickSpecs

Material		Nylon 6/6
Certifications		Recognized under the Component Program of Underwriters' Laboratories File E121095
		Listed under Underwriters' Laboratories File E28430
Flammability Rating		94V-2
Material Temperature Index		Maximum temperature on part not to exceed 221°F (105°C)

FITS HF2 TUBING TRADE SIZE			PART NO.		PART DIMENSIONS
	A Mounting Hole Diameter		Black		B Max O.A. Length		C Body or Thread Length		D Wrenching Nut Thickness		E Wrenching Flats/Flange Dia.
			Snap-In Hub	NPT Hub
	in.	mm.			in.	mm.	in.	mm.	in.	mm.	in.	mm.
Straight-Thru Style
3/8	.875	22,2	8485FC	8487FC	Straight-Thru, Snap-In Hub Part Dimensions Straight-Thru, NPT Hub Part Dimensions
1/2	.875	22,2	8490FC	8493FC
3/4	1.093	27,8	8495FC	8497FC
90° Sweep Style
3/8	.875	22,2	8500FC	8502FC	90° Sweep, Snap-In Hub Part Dimensions 90° Sweep, NPT Hub Part Dimensions
1/2	.875	22,2	8505FC	8507FC
3/4	1.093	27,8	8510FC	8512FC

Standard color: Black Fitting with Black Collar.