For Heavy Duty Ground Pins, see Male and Female

• Flat Heavy Duty Blades are front loaded for overmolding.
• Due to their shaped profiles, Padded Heavy Duty Blades are side loaded for overmolding.
• Heyco Heavy Duty Padded Blades are far less expensive than their Flat counterparts, yet they are functionally equivalent and evaluated and approved by UL for use in UL817 applications.

QuickSpecs

Materials	Alloy 260 Brass (70% Cu, 30% Zn. Higher Cu content resists dezincification)
	Tin-Pl = Brass, Tin plated before or after stamping
	Post-Ni = Brass, Nickel plated after stamping
Certifications	Heavy Duty Non-Padded Blades: UL Listed File E164169
	127-PAD and 128-PAD Series: Evaluated and approved by UL for use in UL817 applications

PART DATA			PART NO.	APPLICATION TOOLING*				PDF
Type	AWG Range	Material		Die**	Feeds	Crimp Punch	Anvil
127 Series
.500 Range/Dryer Blade	8-6	Brass	6000	6000SXX5	Bulk	0V23	0V22
		Tin-Pl	6001	6001SXX5
		Post-Ni	5999	5999SXX5
		Brass	6004	6004SXX5	Dual
127-3 Series
.315 Range/Dryer Blade	8-6	Brass	6010	6010SXX5	Bulk	0V23	0V22
		Tin-Pl	6011	6011SXX5
		Brass	6012	6012SXX5	Dual
127-PAD Series - evaluated and approved by UL for use in UL817 applications
Padded Range/ Dryer Blade	12-8	Brass	6020	6020SXX5	Bulk	0V75	0V74
			6021	6021SXX5	Dual
127-90 Series
90° Range/Dryer Ground Blade	10-8	Brass	6002	6002SXX5	Bulk	0W83	0W82
		Tin-Pl	6003	6003SXX5
		Brass	6005	6005SXX5	Left to Right	0V59	0V58
			6006	6006SXX5	Right to Left	0V46	0V45
127-90-SC Series - Small Crimp
90° R/D Ground Small Crimp	12-8	Brass	6007	6007SXX5	Bulk	0V92	0V90
128 Series
.500 R/D Line Blade	12-8	Brass	6015	6015SXX5	Bulk	0V41	0V40
			6017	6017SXX5	Dual
128-3 Series
.315 R/D Line Blade	12-8	Brass	6016	6016SXX5	Bulk	0V41	0V40
			6018	6018SXX5	Dual
128-PAD Series - evaluated and approved by UL for use in UL817 applications
Padded R/D Line Blade	12-8	Brass	6013	6013SXX5	Bulk	0V74	0V75
			6014	6014SXX5	Dual
310-375 Series
.310 Line Blade	14-10	Brass	6051	6051SXX5	Bulk	0AO3	05C8
.375 Line Blade	14-10	Brass	5950	5950SXX5	Bulk	0B95	0B94
			5951	5951SXX5	Dual	0W72	0W74

* Use the Heyco Standard Applicator Die (indicated by “S” in the Die Part No.), click here.
** “XX” represents Wire Gauge. Please specify Wire Gauge when ordering.