Heyco-Tite Liquid Tight Cordgrips with Split Glands for Pre-assembled Cables are designed for application to the pre-assembled cable after it has passed through the Cordgrip. There is no need to remove and re-install connectors in order to pass the assembly through a panel, while retaining a liquid tight seal. Simply pass the cable termination through the Cordgrip body, apply the Split Gland to the cable, and insert the gland/cable assembly into the Cordgrip fingers. Once the Sealing Nut is tightened, a liquid tight seal is achieved. The Integral Sealing Ring on the Cordgrip ensures a superior seal at the clearance or threaded mounting hole location, every time. There is no need for an O-Ring to achieve a liquid tight seal. Most importantly, Heyco-Tite Split Gland Cordgrips eliminate the need for two costly bulkhead type connectors, as well as the labor required to terminate cables to those connectors. The pre-assembled cable simply passes through the Split Gland Cordgrip.
Heyco-Tite Liquid Tight Cordgrips are made from Nylon 6/6 with a TPE Sealing Gland. They are UL recognized under File E51570 to both Canadian and U.S. requirements, IP 68 rated and have a flammability rating of 94V-2.