PART DATA			PART NO.		APPLICATION TOOLING*						PDF
Profile	AWG Range	Material	Non-polarized	Polarized	Die**		Feeds	Tool Packs	Crimp Punch	Anvil
					For Non-polarized	For Polarized
100 Series - Full Wide / Full Narrow Design with Strain Relief Knee
Flat	18-14	Brass	-	5060	-	5060UXX5	Right to Left	B176R/B177R	C242	C252	-
			-	5061	-	5061UXX5	Left to Right	B176L/B177L			-
110 Series - Standard Blade with Strain Relief Knee
Flat	18-14	Brass	5400	5423	5400UXX5	5423UXX5	Left to Right	B184L/B185L	C234	C253
7-Shape	18-14	Brass	5415	5421	5415UXX5	5421UXX5
Flat	18-14	Brass	5403	5424	5403UXX5	5424UXX5	Right to Left	B184R/B185R
7-Shape	18-14	Brass	5416	5422	5416UXX5	5422UXX5
110-N Series - Notched for High Temperature
Flat	18-14	Brass	5460	5462	5460UXX5	5462UXX5	Left to Right	B184L/B185L	C234	C253
7-Shape	18-14	Brass	5470	5472	5470UXX5	5472UXX5
Flat	18-14	Brass	5461	5463	5461UXX5	5463UXX5	Right to Left	B184R/B185R
7-Shape	18-14	Brass	5471	5473	5471UXX5	5473UXX5
110-E Series - Length Extended for Insulation Crimp; Strain Relief Knee
Flat	18-16	Brass	5407	5420	5407UXX5	5420UXX5	Left to Right	B188L/B189L	C234	C260
7-Shape	18-16	Brass	5417	5414	5417UXX5	5414UXX5
	18-16	Brass	5437	-	5437UXX5	-						-
Flat	18-16	Brass	5439	-	5439UXX5	5413UXX5	Right to Left	B188R/B189R
7-Shape	18-16	Brass	5438	5413	5438UXX5	-						-
102-E Series - Carrier Strip Extended Length for Insulation Crimp
Flat	18-14	Brass	5426	5425	5426UXX5	5425UXX5	Left to Right	B976L/B977L	C825	C826
7-Shape	18-14	Brass	5427	5428	5427UXX5	5428UXX5
116 Series - For Heavier AWG Conductors
Flat	14-10	Brass	5670	5674	5670UXX5	5674UXX5	Left to Right	B196L/B197L	C245	C264
7-Shape	14-10	Brass	5667	5668	5667UXX5	5668UXX5
			5665	-	5665UXX5	-	Right to Left	B196R/B197R				-
116-N Series - For Heavier AWG Conductors; Notched for High Temperature
Flat	14-10	Brass	5656	5657	5656UXX5	5657UXX5	Left to Right	B196L/B197L	C245	C264
7-Shape	14-10	Brass	5658	5659	5658UXX5	5659UXX5
Flat	14-10	Brass	5655	-	5655UXX5	-	Right to Left	B196R/B197R				-

7-Shape Blades feature a retention ledge to maintain position during overmolding (mold stop).
* Heyco high volume Application Tooling, designed for 3-5 ton presses - click here.
Heyco Mini Applicators, designed for 1.5-3 ton bench top presses, are available - click here.
** “XX” represents Wire Gauge. Please specify Wire Gauge when ordering.

NEMA 1-15P & 5-15P - .058" Mold Line Thickness

For mating Female Cord Connectors, see click here.
For Male Ground Pins, see Male & Male Right Angle.
For Full Thickness Male/Female Combination Terminals, see 1186 Series & 1191 Series.

• All Heyco Full Thickness Blades pass UL 1659 crimp area test requirements.
• All Heyco Full Thickness Blades feature a 90° “knee” section for strain relief and assembly orientation. Exceptions: 116 and 116-N Series parts.
• All Flat Full Thickness, Non-Polarized Blades are front loaded for overmolding.
• All Polarized and 7-Shape Full Thickness Blades are side loaded for overmolding.
• Series 100 Polarized Blades feature a unique full wide/full narrow design i.e., for strength and appearance, both neutral (white wire) and hot (black wire) have straight sides.
• Series 110-N and 116-N Full Thickness Blades are notched to meet high temperature pull out requirements.
• Series 110-E and 102-E Insulation Crimp Blades provide strain relief and wire support for shock and vibration resistance, as well as support for insertion into the mold block. Series 102-E Blades are stamped with a carrier strip between blades. These parts accept a wider conductor range than the 110-E Series.
• Series 116 and 116-N Blades feature a larger crimp section for heavier 14-10 AWG gauge conductors.
• For strain relief protection, the 116 Series feature a flow-through hole below the mold line and 116-N blades are notched.
• DFARS Compliant

QuickSpecs

Materials		Alloy 260 Brass (70% Cu, 30% Zn. Higher Cu content resists dezincification)
Certifications		Recognized Component under UL File E164169
		Certified by the Canadian Standards Association File 91824
Standards		NEMA 1-15P & NEMA 5-15P