PANEL THICKNESS CLAMPING RANGE				WIRE DIA. RANGE Maximum (1) Wires	PART NO.	DESCRIPTION	FOOTPRINT A x B		OVERALL HEIGHT C		CAD
Minimum		Maximum
in.	mm.	in.	mm.				in.	mm.	in.	mm.
Single Wire 90° Clip - for panels up to .125" (3,2 mm) thick
.06	1,4	.13	3,2	.20˝ (5,1 mm)- .33˝ (8,3 mm) each cable	S6406	SunRunner 90° 100 Pack	.65 x .78	16,5 x 19,8	.39	9,9
					S6446	SunRunner 90° Bulk
Double Wire 90° Clip - for panels up to .125" (3,2 mm) thick
.03	0,8	.13	3,2	.20˝ (5,1 mm)- .33˝ (8,3 mm) each cable	S6436	SunRunner® 90-2 100 Pack	.65 x .98	16,5 x 24,9	.39	9,9
					S6476	SunRunner® 90-2 Bulk
Four Wire 90° Clip - for panels up to .125" (3,2 mm) thick
.06	1,4	.13	3,2	.20" (5,1 mm)- .30" (7,6 mm) each cable	S6439	SunRunner® 90 - 4 Clip 100 Pack**	.56 x 1.61	14,2 x 40,9	.36	9,1
					S6479	SunRunner® 90 - 4 Clip Bulk**

*Can accommodate up to three .33˝ (8,3 mm) diameter cables.
**SunRunner 90-4 parts are not cULus

• SunRunner 90° Cable Clips are designed to mount at a 90° angle to the original SunRunner^®.
• The SunRunner 90° will accommodate a single cable from .20˝ (5,1 mm) to .30˝ (7,6 mm); SunRunner 90°-2 will accommodate (2) of these cables; SunRunner 90°-4 will accommodate (4) cables.
• SunRunner 90° Series is designed for use with PV modules mounted in the “landscape” mode. PV modules with shorter than normal junction box cables cannot be dressed out to the sides of the module. The SunRunner 90° Series will also allow the junction box cables to be run to the adjacent modules across the short side of the PV module frame.
• Not for use in a marine salt water environment. Contact Heyco for alternative materials.
• DFARS Compliant

QuickSpecs

Material		.025˝ thick 304 stainless steel (SunRunner 90° and SunRunner 90-2) .020˝ thick heat treated 410 stainless steel (SunRunner 90-4)
Certifications		Certified by UL for Compliance with both Canadian and US Requirements under File E54523